2018 Pillar DH-50/60 SERIES 5012

2018 Pillar DH-50/60 SERIES 5012

The DH-50 and 60 series Pillar drills are 5 plex toolbars with parallel lifting sub frames to lift and lower the double shoot Disc/Hoe openers. The main toolbar does not move to lift the openers out of the ground. With depth stops on the cylinders it is very easy maintain the correct frame height as the disc wears or when changing seeding depth.

They also feature a rear walking beam that keeps all the transport wheels on the ground. This feature removes the stress on the frame during transport and keeps the toolbar as level as possible in the field. There are walking axles on the transport wheels as well, these features keep an even load on all four corners of the toolbar all the time.

The DH5010 and DH6010 Pillar Disc Drills come with Flexi-coil easy flow headers but can be adapted to other air carts as well. These two models come with an 8 run, double shoot air pack.

• Floating hitch keeps your wheels on the ground.

• Walking axles provide better contouring and weight distribution.

• Walking beam in the back of the center section removes all frame torque in transport and gives excellent ground contouring during seeding

• All tool-bars can be set up on 10” or 12” spacing.

• All tool-bars can be configured to either tow between or tow behind carts.

• All depth cylinders and air pack components are easy to reach without climbing on the tool-bar.