2024 New Holland Construction Compact Wheel Loaders W50C Tool Carrier

Current New Holland Construction Compact Wheel Loaders

Swipe to View More

Year 2024
Make New Holland Construction
Model Compact Wheel Loaders

Year 2024
Manufacturer New Holland Construction
Model Name Compact Wheel Loaders
Trim Name W50C Tool Carrier
Generic Type (Primary) Compact
Engine Type F5HFL463B*F001 | 4-stroke
Cylinder Liners 4 cylinders
Bore 3.898 in (99 mm)
Stroke 4.33 in (110 mm)
Displacement 3.4 liters
Engine Power Gross hp: 58 hp (43 kW) | Net hp: 55 (hp 41 kw)

HIGH PRODUCTIVITY BUILT ON EXPERIENCE

New Holland’s C Series range of compact wheel loaders offer a fresh alternative to the traditional farm, landscape, municipal projects and material handling solutions. In addition to being an asset in other areas in the light construction industry, New Holland's W50C ZB, W50C TC and W80C HS models aid in loading diet-feeders and high-sided trailers.

Features may include:

CLEAN, POWERFUL ENGINES

The entire compact wheel loader range boasts 3.4 liter Common Rail F5H engines developed by FPT Industrial that comply with stringent Stage V emissions regulations.

PRESS & GO HYDROSTATIC TRANSMISSION

All models are equipped with hydrostatic transmissions. Press the accelerator and go, smoothly and without fuss.

SUPERIOR COMFORT AND SAFETY

An almost unobstructed 360-degree vision is offered by the newly designed cab. The elevated driving position and an abundance of curved glass within four narrow pillars ensure the best view of any materials handler on the market. Access via the wide-opening glass door is easy and straightforward. Operators will appreciate the bright airy space and fully opening side window and low noise levels of 71dB(A). Further comforts include 10 air vents, air conditioning, air suspended seat, tilting and telescopic steering column and many useful storage compartments.

SETTING NEW STANDARDS OF PERFORMANCE AND PRODUCTIVITY

New Holland compact wheel loaders are designed to maximize productivity and minimize the time needed for servicing and attachment changeover. The line-up delivers consistently high levels of performance in every task. Operators enjoy the superior comfort of the cab, maximizing their productivity with minimum fatigue.

BUILT-IN VERSATILITY

Two choices of linkage are available, depending on the end user's preference. Either the Z-bar linkage or the TC linkage can be specified.

Engine

Engine Type F5HFL463B*F001 | 4-stroke

Cylinder Liners 4 cylinders

Bore 3.898 in (99 mm)

Stroke 4.33 in (110 mm)

Displacement 3.4 liters

Engine Power Gross hp: 58 hp (43 kW) | Net hp: 55 (hp 41 kw)

Fuel System

Fuel Injection High pressure common rail injection

Fuel Type Diesel | Replaceable, full flow

Drivetrain

Transmission Hydrostatic transmission

Operational

Operating Speed Rated speed, full load: 2500 rpm | Low idle: 950 rpm | High idle, no load: 2500 rpm

Dimensions

Height Cab: 97” (2458 mm)

Wheelbase 82” (2075 mm)

Ground Clearance Under shaft: 17” (444 mm) | under axles: 13” (321 mm)

Dimensions Angle of departure: 28° | Bucket reach - fully raised, 45° dump: 26” (668 mm) | Bucket reach - 7 ft 0 (2.13m), 45° dump: 37” (948 mm)

Overall Width without bucket: 69” (1740 mm)

Width Tread: 55” (1400 mm)

Height Operating height - fully raised with spillguard: 154” (1400 mm) | Hinge pin height - fully raised: 121” (3113 mm) | Dump height - fully raised, 45° dump: 93” (2396 mm)

Overall Length bucket level on ground: 204” (5219 mm)

Depth, Maximum Dig: 5” (126 mm)

Outside Turning Radius 146” (3721 mm) | Turning angle: From center degrees 40 degrees | Total angle: 80 degrees | Rear axle oscillation, total degrees: 18 degrees

Capacities

Fuel Capacity 23 gal (87 L)

Hydraulic Capacity Total: 15 gal (57 l) | Reservoir: 11 gal (40 l)

Axle Capacity, Front 2 gal (9 L)

Axle Capacity, Rear 3 gal (12 L)

Oil capacity 2 gal (7 L)

Weights

Weight 10,913 lb (4950 kg)

2024 New Holland Construction Compact Wheel Loaders W50C Tool Carrier